background image

区 杰 扬

五 金 制 品 有 限 公司

FOSHAN SHUNDE JAEYONG HARDWARE CO., LTD.

电话 

(TEL)

+

86-757-2538 8000               

传真 

(FAX)

+86-757-2557 7528                  

网站:

http://www.jaeyong.cn

地址:广东省佛山市顺德区均安镇沙浦大街

23

(528329)

Add.

No.23 Shapu Street, Junan Town, Shunde Area, Foshan, Guangdong Province, China

handrims forward with the same force on both hands to make the wheelchair move forward, then loose 
both hands off the handrims. When the wheelchair has slowed down its speed after certain distance of 
movement, please repeat the above procedure.

Way to go upstairs

When the wheelchair is going upstairs, the user must have an attendant who will be assisting at the back 

of the wheelchair. The attendant must step hard on the pedal located besides the rear wheels, so the 
wheelchair may incline backwards till the front wheels achieve the height of next step of the stairs. Push 
the wheelchair forward a little and loose the feet from the pedal so the front wheels may touch the step. 
The attendant must push hard the wheelchair so the rear wheels may move forward to the next step. 
Repeat the procedure until the wheelchair achieves its destination.

Way to go downstairs

When the wheelchair is going downstairs, the user will need two attendants for assistance, one at the 

front and the other at the back of the wheelchair. To be able to go downstairs, the attendant at the back 
must hold the handgrips tight to assure the wheelchair will not fall off the stairs. The attendant at the front 
must step down first and elevate the front frame of the wheelchair, then slowly and carefully pull the 
wheelchair down from the stairs. Repeat the above procedure until the wheelchair achieves its destination. 
Finally, the front attendant must put down the front frame of the wheelchair so the front wheels can touch 
the ground.

Precautions for adjusting the backrest angle

This wheelchair provides the option of adjusting the angle of the backrest according to every user's 

needs.

The attendant must hold the pushing handgrip with both hands and push the cylinders handgrips from 

both sides at the same time with the fingers. Elevate or push gently the handgrips with both hands and 
adjust to the suitable position, then release the hands to stop the backrest till the suitable angle.

Safety recommendations

1. The maximum capacity for wheelchair is for 120kg. Users over 120kg, please use carefully or 

contact the manufacturer to purchase customized product.

2. For self propel wheelchairs, the user should maintain an uniform speed. The recommended speed 

for self propel use is at 3-5Km/h.

3. The wheelchair is recommended to be used on flat ground. If any obstacle appears, please detour to 

avoid any danger of topple and fall.

4. While using the wheelchair, the user should not stand on the footrest as this act will cause danger of 

topple and fall.

5. The user must assure to have good body condition before using the wheelchair on sloping ground. 

The angle of the sloping ground should be no more than 10 degrees for safety considerations. If the angle 
of the sloping ground is over than 10 degrees, there must be an attendant to assist the user to push the 
wheelchair at the back.

6. Do not tilt or swerve while the wheelchair is being used on sloping ground. Using brakes abruptly 

when going downhill is not recommended as this will cause danger of topple and fall to the front.

Maintenance

To keep the wheelchair in its best condition, please proceed with the following maintenance:
1. Before using the wheelchair and during the first month of use, check all the screws if they are 

tightened. If any loosen situation appears, please tighten immediately to assure the safety of the user. 
Under normal use, please proceed with routine inspection every 3 months to assure all the parts are in 

Foshan Shunde Jaeyong Hardware Co., Ltd.

4/5

Summary of Contents for JY-260






Reviews: