佛
山
市
顺
德
区 杰 扬
五 金 制 品 有 限 公司
FOSHAN SHUNDE JAEYONG HARDWARE CO., LTD.
电话
(TEL)
：
+
86-757-2538 8000
传真
(FAX)
：
+86-757-2557 7528
网站：
http://www.jaeyong.cn
地址：广东省佛山市顺德区均安镇沙浦大街
23
号
(528329)
Add.
：
No.23 Shapu Street, Junan Town, Shunde Area, Foshan, Guangdong Province, China
13. Brake
14. Anti-tipper
Operating instructions
The JY-260 Reclining Wheelchair is a modern, practical, stable, durable, with good heavy resistance,
multifunctional and comfortable wheelchair. It is suitable for people with disabilities and for elderly people
with nursing and transport purposes.
The Reclining Wheelchairs are basically assembled before selling. It is only needed to proceed with
simple installation and adjustment of some movable accessories.
1. Check the content of the box to see whether the accessories, user manuals, etc, are complete. If
not, please contact your seller or the manufacturer.
2. Open the box and take out the wheelchair from the box. Place the wheelchair on the ground. Push
down the wheelchair seat until the wheelchair is completely opened and extended ready for use. Put
down the both side boards from right and left side to their normal use position.
3. Turn the right and left footplates to the vertical position. Pull up the wheelchair from the center of the
seat with your hands and fold the both armrests to the center until the wheelchair is completely
folded.
4. Installation and adjustment of footrest (footplate):
Align and mount the footrest fixing tube into the front tube of he wheelchair frame. Then, gently rotate the
leg support from outside to inside until the fixing tube is mounted into the fixing hole of the main frame.
If it is necessary to remove the leg support, grab the inner wrench of the leg support and press it
backwards. Twist the leg support outward to certain angle and elevate to remove it from the main frame.
Height adjustable footrest adjustment:
If it is necessary to adjust the height of footrest, press gently the adjusting wrench with one hand and use
the other hand to elevate or to press down the footrest to the suitable height, then release the wrench.
Footplate adjustment:
Use the wrench to loosen counterclockwise a little the screw on the leg support connecting tube. Pull
down the inner tube of the footplate and adjust the footplate to the suitable place, then, tightened the screw
clockwise with the wrench.
5. Installation and adjustment of side boards and armrests
If it is necessary to remove the armrest, hold the upper part of the armrest frame with one hand and push
the fixing spring located at the front of the armrest frame, then pull the armrest upwards. If it is necessary
to install the armrests, align the armrest frame to the tube hole and plug and pat the armrest until the front
button is automatically locked.
Precautions
Using the brakes
This wheelchair has two brake systems. The applied system for the user is the pushing brake system.
When the wheelchair needs to be stopped and needs brakes to assure its immobility, the user must hold
the brake handgrips from right and left side with both hands and push forward the brake handgrips until
they are automatically locked to stop the rear wheels.
To unlock the brakes, move backwards the brake handgrips.
The other brake system is for the attendant and it is located at the back of the wheelchair beneath the
push bars. The attendant may use the brake handgrips to stop the wheelchair from moving.
If brake is needed, use both hands to hold tight the brake handgrips from right and left side to stop the
wheelchair. This brake has the function of maintaining the immobility of the wheelchair.
Self Propel Wheels (Handrims)
The user must first sit steadily on the wheelchair, grab the handrims with his/her hands and push the
Foshan Shunde Jaeyong Hardware Co., Ltd.
3/5
