Fosgate Audionics FA10.0 Owner'S Manual Download Page 20

– 15 –

1. INSTRUKTIONEN LESEN
Alle Sicherheits- und Operationshinweise Ihres Fosgate Audionics
Equipments sollten vor der Inbetriebnahme gelesen werden.

2. BETRIEBSANLEITUNG AUFBEWAHREN
Bewahren Sie die Bedienungsanleitung sorgfältig auf, damit Sie in
dieser auch in Zukunft nachschlagen können.

3. WARNUNGEN BEACHTEN
Alle Warnungen des Gerätes und der Bedienungsanleitung sind
extrem wichtig und müssen befolgt werden.

4. INSTRUKTIONEN BEACHTEN
Alle Operations- und Gebrauchshinweise sind extrem wichtig und
müssen beachtet werden.

5. HITZE
Das Equipment sollte fern von Hitze ausstrahlenden Geräten
aufgestellt werden, wie z.B. Heizungen, Öfen etc.

6. VENTILATION
Das Equipment sollte so aufgestellt werden, dab eine ausreichende
Ventialition gewährt wird.

7. WASSER UND FEUCHTIGKEIT
Das Equipment sollte nicht im oder in der Nähe von Wasser benutzt
werden, wie z.B. in Schwimmbädem, Saunen etc. Es sollte ebenfalls
nicht in Überschwämmungsgefährdeten Gebieten aufgestellt wer-
den, wie z.B. Kellerräumen.

8. STROMANSCHLUb
Das Equipment darf nur an eine Stromversorgung angeschlossen
werden, die die gleichen Parameter aufweist, welche auf der
Rückseite, über em Anschlubterminal des Gerätes, aufgelistet sind.

9. SCHUTZ DER ZULEITUNG
Die Zuletungen sollten so verlegt werden, dab diese nicht in den
Bewegungsbereich anderer Möbelstücke oder Personen hereinra-
gen. Achten Sie darauf, das das Kabel nicht gequestscht oder durch-
schnittren wird, wie z.B. unter Schränken oder an scharfen Kanten
etc.

10. MASSEANSCHLUb
Das dreiadrige Anschlubkabel ist mit einem Erdungsleiter ausgestat-
tet, welcher die Risiken eines Elektroschocks verringert. Das Kabel
hat eine Länge, welche für die meisten Anwendungen völlig ausre-
icht. Wenn Sie Verlängerungskabel benutzen, achten Sie darauf, das
dies die erforderlichen Ströme bertragen können. Benutzen Sie
immer dreiadrige Verlängerungskable.

11. ZEITRÄUME IN DENE DAS GERÄT NICHT GENUTZT WIRD
Wird das Gerät  über einen längeren Zeitraum nicht genutzt (z.B.
Urlaub), ziehen Sie bitten den Netzstecker aus der Steckdose.

12. REINIGEN
Reinigen Sie das Gerät nur, wie in der Bedienungsanleitung detail-
liert beschrieben.

13. EINDRINGEN VON FREMDKÖRPERN
Achten Sie darauf, dab weder Fremdkörper, noch Flüssigkeiten in
das Gerät eindringen.

14. ERFORDERLICHER REPARATURSERVICE
Fosgate Audionics Equipment sollte nur von qualifizierten Service-
Technikern instand gesetzt werden, wenn:

A.

Das Stromversorgungskabel beschädigt wurde

B.

Eine Flüssigkeit in das Gerät eingedrimgem ist

C.

Das Gerät Regen ausgesetzt wurde

D. Das Gerät nicht mehr ordnungsgemäb funktioniert, ggf. nicht

mehr die volle Leistung abgibt

E.

Das Gerät runtergefallen ist oder das Gehäuse beschädigt
wurde

15. SERVICE
Der Benutzer sollte nur den Service ausführen, der in der
Bedienungsanleitung für den Benutzer freigegeben wird. Den weit-
erführenden Service sollte nur von qualifizierten Tevhnikern
durchgeführt werden.

16. AUFSTELLUNG
Das Equipment sollte so aufgestellt werden, dab der gewählte
Untergrund die erforderliche Stabilität aufweist, so dab eine
gefahrlose Bnutzong gewährleistet wird.

Das Equipment und der Untergrund sollte mit äuberster Vorsicht
bewegt werden. Bei schnellen Bewegungen oder starkem
Abbremsen, kann es zum Umkippen des Equipments kommen.

ACHTUNG – WICHTIGE SICHERHEITS – INFORMATIONEN

Der Blitz mit dem Pfeil, in einem gleihschenkligen Dreieck, soll den
benutzer vor unisolierter “gefährlicher Spannung” innerhalb des
Gerätes warnen.

Das Ausrufezeichen, in einem gleichschenkligen Dreieck, soll den
Benutzer darauf aufmerksam machen, dab dem Gerät wichtige
Operations - und Service - Informationen beigefügt sind.

Summary of Contents for FA10.0

























Reviews: