Fosgate Audionics FA10.0 Owner'S Manual Download Page 19

– 14 –

1. LIRE LES INSTRUCTIONS
Le mode d’emploi et les mesures de sécurité de votre équipement
Fosgate Audionics devraient être consultés avant sa mise en marche.

2. CONSERVER LE GUIDE DE L’UTILISATEUR
Le mode e’emploi et les mesures de sécurité devraient être conservés
pour des références futures.

3. CONSIDÉRATIONS DE MISE EN GARDE
Le mode d’emploi et les mises en garde concernant cet équipement
sont de grande importance et devraient être suivis.

4. SUIVRE LE MODE E’EMPLOI
Le mode d’emploi et les conseils d’utilisation sont importants et
devraient être suivis.

5. CHALEUR
Le matériel devrait être préservé loin de toute source de chaleur:
radiateurs, cuisinière/fours, cheminées,…etc.

6. VENTILATION
Le matériel devrait être utilisé dans un endroit à bonne ventilation. Il
reste nécessaire de respecter la circulation de flux d’air à l’intérier et
autour du meuble.

7. EAU ET HUMIDITE
Le matériel ne devrait pas être utilisé près d’une source d’eau, telle
qu’une baignoire, un évier, ou une aire de baignade. De plus, le
matériel ne devrait pas être utilisé dans des lieux sujets aux innonda-
tions, tels que les sous-sols.

8. SOURCES D’ÉNERGIE
Le matériel devrait seulement être relié  à une source d’énergie de
même voltage et fréquence que celle indiquée sur le tableau arrière,
au dessus de la fiche d’entrée de la prise de courant.

9. PROTECTION DE LA PRISE DE COURANT
La prise de courant devrait être arrangée de façon à ne pas interférer
avec le déplacement d’objets (chariots, pales de ventillateurs…etc.)
ou de personnes à l’intérieur de la pièce. D’autre part, il faudrait faire
tres attention à ce que la prise ne soit pas percée ou coupée, ou dis-
posée de façon à risquer de l’être, comme sous un tapis, autour d’un
angle pointu…etc.

10. PRISE DE COURANT ÀTROIS FICHES
La prise de courant est composée de trois fiches, désignées à réduire
le risque de décharge  électrique de l’appareil.  Elle devrait être de
longueur suffisante pour la plupart des utilisations de ce matériel.
L’utilisation de rallonge t d’adaptateur est déconsellée à moins dêtre
en mesure de fournir la charge électrique requise à un fonctionement
sans risque, de tout matériel relié.

11. PÉRIODES DE NON-UTILISATON
Durant les périodes de non-utilisation, la prise de courant ne devrait
pas être branchée à une source d’energie.

12. NETTOYAGE
Le matériel devrait être nettoyé en respectant les instructions
indiquées.

13. PENETRATION DES LIQUIDES
Un attention particulière est éxigée quant à la dispersion de liquides
tels que les produits de nettoyage et boissons, de façcon  à  éviter
toute pénetration dans l’enceinte du matériel.

14DÉGÂT NÉCESSITANT UNE RÉVISION
Le matériel Fosgate Audionics devrait être révisé par des personnes
qualifées de service après-vente, lorsque:

A.

Les fiches ou la prise de courant ont été endommagé, ou:

B.

De objets sont tombés sur le matériel, ou des liquides s’y sont
dispersés, ou:

C.

Le matériel a été exposé à la pluie, ou:

D. Le matériel ne semble pas fonctioner correctement, ou 

affiche un changement de performance, ou:

E.

Le matériel a été renversé à terre, ou l’enceinte a été 
endommagée.

15. REVISION
L’utilisateur ne devrait pas essayer de réviser le matériel en allant
plus loin que ce qui a été décrit dans le mode d’emploi. Toute autre
réviion devrait être confiée à un personnel qualifié.

16. CHARRIOTS ET MEUBLES
Le matériel devriat être utilisé avec des charriots et meubles de
qualité et stabilité suffisante à son utilisation préconçue.

L’ensemble du matériel et du charriot devrait être déplacé avec pré-
caution. Des mises en marche et arrêts brusques, des collisions
excessives ainsi que des surfaces inégales peuvent renverser
l’ensemble du matériel et du charriot.

ATTENTION: INFORMATIONS IMPORTANTES DE SÉCURITÉ

La lumière clignotante du symbole de la flêche à l’intérieur d’un triangle
équilatéral, à pour objet d’alerter l’utilisateur de la présence “d’un voltage
dangereux” non-isolé à l’intérieur du produit, qui pourrait être de magni-
tude suffisante au risque d’éléctrocution.

Le point d’exclamation, à l’intériur d’un triangle équilatéral, à pour objet de
prévenir l’utilisateur de l’importance des instructions de fonctionement et
de maintenance, jointes à l’appareil.

Summary of Contents for FA10.0

























Reviews: