NVR User Manual
www.foscam.com
76
Choose
Menu > Settings > General
in the GUI interface, and verify the time is correct.
Verify the search condition is correct.
Choose
Menu > Playback
in the GUI interface, and verify the channel and time are correct.
Verify the HDD status is normal.
Choose
Menu > About > HDD Info
in the GUI interface, view the HDD status.
3. Why recording is not performed after motion detection is enabled?
On the "Motion Detection" page, check whether the following are correctly set:
Check whether the motion detection channel is correct.
Check whether a trigger time segment is set.
Check whether a detection area is set.
Check whether recording is selected.
4. Why can the NVR search the IPC but cannot connect the IPC?
On the "IPC management" page, check whether the following are correctly set:
Check whether the user name and password for the IPC are correct.
Check whether the web page port for the IPC is correct.
Check whether the IPC also supports the protocol selected in the NVR.
5. The screen of the display is incomplete.
Confirm the current resolution and check the resolution supported by the display. If the resolution is
1920*1080, the display needs to support the resolution 1920*1080.
6. Why can
'
t opened web pages on the client be used properly after the NVR server switches to
the 1080P mode?
When the NVR server switches to the 1080P mode, some functions can take effect only after the server
reboots. In this case, log out of the Web client and log in to it again. In similar cases, for example,
changing the IP address and HTTP port of the NVR, you need to log in to the client again.
7. Why can
'
t video files be downloaded during video playback or downloaded files cannot be
played back properly?
To save consumed resources, the server limits concurrency of video playback and file download. In this
case, stop video playback and then download files or play back videos after video files are downloaded.
8. Why does the Web client prompt TIME OUT after you enable or disable UPNP in network
settings?
In this case, the server restarts some applications. Accordingly, you need to exit the web client and log
in to the client again.
9. It prompt "Have no right to create directory or file!" after taking snapshot.
When you use Windows7 or Vista, you may be not able to snapshot path because of the security
