NVR User Manual
www.foscam.com
44
3.4.3 Alarm
Motion Detection
Follow the steps to set the motion detection parameters. In the live view mode, once a motion
detection event takes place, the NVR can analyze it and perform many actions to handle it. Enable
motion detection function can trigger certain channels to start recording, or trigger full screen
monitoring, output alarm, send Email, upload FTP, buzzer alarm and so on.
In the live view mode, there are icons at the right bottom of the screen for each channel.
The Icon
indicate alarm was triggered.
The Icon
indicate the IPC is recording.
You can follow the steps to schedule a record which triggered by the detected motion.
Choose
(Parameter Configuration) > Alarm > Motion Detection
. The
Motion Detection
page is displayed.
Step1
Select channel from drop-down box list.
Step2
Check the
Enable
checkbox to enable motion detection function.
Step3
Select the
Sensitivity
and
Detection Interval
.
The higher the sensitivity, the NVR will be more easily alarmed.
The Detection Interval time between two motion detection.
