FI8906W Quick Installation Guide
www.foscam.com
- 16 -
1)
Open the package
.
Take out the camera out of the box carefully.
2)
Mount the antenna.
Then take the Wi-Fi antenna, mount it on the SMA connector on the back
of the camera, screw the antenna to the back, and make the antenna stand vertically.
Figure 1.1 Mount the antenna Figure 1.2 Plug the network cable
3)
Get the camera connected to the router, and get it powered.
Use the network cable to connect the camera to the router or the switch in the LAN network at your
home or your office. Plug in the power. The small green light on RJ45 will turn on, the small orange
light will blink.
Insert the CD into the CD drive of your laptop and go to the folder
“FI8906W”,then find the folder “For
MAC
OS”. Copy the IP camera tool to your MAC and start the program.
Figure 1.3 Shortcut icon
1. Hardware Installation
Start Installation
2. Software Installation