FI8906W Quick Installation Guide
www.foscam.com
- 11 -
If your ISP provides Static WAN IP Service please go to Chapter 5.1 (Page 11).
If your ISP provides Dynamic WAN IP Service please go to Chapter 5.2 directly (Page 12).
5.1 Static IP user
Static IP users do not need to set DDNS service settings for remote access. When you have finished
connecting the camera using LAN and port forwarding, you can access the camera directly from the
Internet by the WAN IP and port number.
How to Obtain the WAN IP from a public website
To obtain your WAN IP address, enter the following URL in your browser:
http://www.whatismyip.com
.The webpage at this address will show you the current WAN IP.
Figure 2.5 Get to know the WAN IP address of the router
Access the IP Camera from the Internet
You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and
port number in IE browser or other browsers you use. For example, Http:// 183.37.28.254:85
Make sure port mapping (or also known as port forwarding) is successful. You can do port
mapping in two ways.
1) Enter the setting page of the router to enable UPNP function. Then login the camera as
administrator, choose
UPnP Settings
to enable UPNP and make sure the state is “UPnP success”.
2) Do port forwarding manually. (details: Fig.2.6)
If your router has a Virtual Server, it will do port m
apping. Please add the camera’s LAN IP and port
which you set in basic network settings to the Virtual map list.
Note:
If you plug the camera in a router, it will have dynamic IP address and you need to set DDNS
service settings to view it remotely.
Note