FOS Technologies L005613, User Manual

Page: 6 / 8

L005613 FOS TV BICOLOR PANEL USER MANUAL L005613 FOS TV BICOLOR PANEL USER MANUAL
Verify that the voltage matches the rated voltage.
When the voltage is 110V, Do not connect more than 10 lightings in total to AC mains
power in one interconnected daisy chain
When the voltage is 220V, Do not connect more than 20 lightings in total to AC mains
power in one interconnected daisy chain
Before using the fixture, check that all power distribution equipment and cables are in
perfect condition and rated for the current requirements of all connected devices.
Always ground (earth) the fixture electrically.
Avoiding hit the Light when you are move or install the light.
The minimum distance between light-output and the illuminated surface must be more
than 0.5 meters. Keep all combustible materials (for example fabric, wood, paper) at least
0.2 meters away from the fixture.
Do not expose the fixture to rain or moisture.
Avoid looking directly into the light source (especially those who suffer from epileptic fits)
Maximum ambient temperature (Ta) is 40°C. Do not operate fixture at temperatures higher
than this.
The Maximum surface temperature is 50°C
When suspending the fixture above ground level, verify that the structure can hold at least
10 times the weight of all installed devices.
Verify that all external covers and rigging hardware are securely fastened and use an
approved means of secondary attachment such as a safety cable.
Ⅳ
POWER CONNECTION
I
NSTALLING A
N
ENUTRIK
C
ONNECTOR ON A
P
OWER
C
ABLE
to save.
Mode Working mode option
Mode
= 04 Channel DMX
Mode
= 05 Channel DMX
Mode
= Alone scene
↓
Set auto mode Dimmer 1
Dimmer,
dimmer=0-255
= 000
Set auto mode Dimmer 2
Color Temperature=
3200K
4200K
5600K
= 000
Set alone scene Strobe
Strobe,
Strobe=0-255
= 000
Press UP ,
DOWN button
to choose the
menu you
need, then
press
ENTER
to save.
S
ETTING
DMX 512 M
ODE
1. Press ENTER when the display show the title information;
2. Press UP/DOWN to choose the Mode menu, then press ENTER into;
3. Press UP/DOWN to choose 01 Channel DMX or 01 Chanel DMX menu, then press
ENTER to save;
4. Press MENU/SET back the title mode(the second line will shows 01CH or 01CH
Address=001), the setting is ok.
S
ETTING
P
OWER ON
, L
IGHT ON
1. Press ENTER when the display show the title information;
2. Press UP/DOWN to choose the Mode menu, then press ENTER into;
03
08