6
3
、
Safety Instructions
★
This product guide contains important information about the safe installation
and use of this projector. Please read and follow these instructions carefully and
keep this manual in a safe place for future reference.
★
When unpacking and before disposing of the carton, check there is no
transportation damage before using the projector. Should there be any damage
caused by transportation,consult your dealer and do not use the apparatus
★
The projector is not designed or intended to be mounted directly on to
inflammable surfaces.
★
The projector is only intended for installation, operation and maintenance by
qualified personnel.
★
The projector must be installed in a location with adequate ventilation, at
least 1m from adjacent wall surfaces. Be sure that no ventilation slots are
blocked
★
Do not project the beam onto inflammable surfaces, minimum distance is 5m.
★
Do not attempt to dismantle and/or modify the projector in any way. Electrical
connection must only be carried out by qualified personnel.
★
Before installation, ensure that the voltage and frequency of power supply
match the power requirements of the projector.
★
It is essential that each projector is correctly earthed and that electrical
installation conforms to all relevant standards.
★
Do not connect this device to any other types of dimmer apparatus.
★
Make sure that the power-cord is never crimped or damaged by sharp edges.
Never let the power-cord come into contact with other cables. Only handle the
power-cord by the plug. Never pull out the plug by tugging the power-cord.
★
The projector should always be installed with a secondary safety fixing. A
safety cord is supplied for this; it should be attached as shown in “installing the
projector” section.
★
There is no user serviceable parts inside the projector; do not open the
housing and never operate the projector with the covers removed.
★
This device is not designed for permanent operation. Consistent operation
breaks will ensure that the device will serve you for a long time without defects.
★
The maximum ambient temperature t = 45°C must never exceeded.
★
If this device is operated in any other way other than the one said in this
manual, this device may suffer damages and thus the warranty becomes void.
★
Always disconnect from the mains, when the device is not in use or before
cleaning it or before attempting any maintenance work
