5
In DM X Controller mode, at the last fixture in the chain, the DMX output has to
be connected with a DM X terminator. This prevents electrical noise from
disturbing and corrupting the DMX control signals.
Th e DMX terminator is simply an XLR connector with a 90 - 12 0Ω (ohm) 1/4
watt res is to r connected across pins 2 and 3 o f a male XLR connector (DATA+
and DATA-). This terminator is then p lugged into the output socket o n the last
fixture in the daisy chain to terminate the line. Using a cable terminator will
decrease the possibilities of erratic behavior.
