4.
38033
38077
38049
38088
Fig.4
Fig.5a
Fig.4a
STEP 4 - Fixing Crossbar to Uprights (Fig. 4)
STEP 5 - Attach Backbar to Sidebar (Fig. 5)
Locate the corner bracket (38033) over the pre-positioned
bolts. Place M10 washers (38088) over M10x20 bolts as
per diagram (fig.4a).
Secure in place using M10 nuts (38077).
Repeat for other side.
ATTENTION -
ensure all joints are butted up to each other
before tightening.
STEP 6 - Fixing Backbar to Sidebar (Fig. 6)
Place stanchion socket (39017) over pre-positioned bolts.
Place M10 washers (38088) over stanchion socket bolts only,
leaving two bolts free on the backbar and sidebar.
See (fig.6 & fig.6a)
Secure in place using M10 nuts (38077).
Repeat for other side.
ATTENTION -
ensure all joints are butted up to each other
before tightening.
ATTENTION, WEIGHTS – PLEASE NOTE!
If weights have been bought as an add-on slide into place
before securing corner as per diagram (fig.17)
*see add-ons for instructions*
Fig.6a
Fig.6
Slide 3x M10x20 bolts (38049) into the backbar.
Slide 4x M10x20 (38049) bolts into sidebar.
See (fig.5 & fig.5a)
Slide 2x M10x20 into corner.
Slide the corner joint into backbar and sidebar.
Repeat for other side.
Fig.5
