11.
Step 15 – Tensioning net. (Fig.15, fig.15a & fig.15b)
Take ratchet strap (39129) and clip to the back corner of the net,
Thread the end through the stanchion D-ring and the ratchet.
Take ratchet strap (39133) and clip it to the net at the same height
as the corner, in line with the centre of the crossbar straight bracket.
Thread the end through the stanchion D-ring and the ratchet.
Repeat this for the other side.
Use ratchet to tension net to the required position. When the
net is tight, attach the net to the net support using cable ties.
Fig.15
Fig.15a
Fig.15b
*ATTENTION –
DO NOT OVER TIGHTEN RATCHET OR NET.
