SumLight™ Function
The SumLight™ function substantially increases the sensitivity of the CMOS array in the event
of a reduction in the light level, thus enabling observation in conditions of low light without
using the IR illuminator.
1. To activate the SumLight™ function, press briefly theLEFT (8) button.
2. Press the LEFT (8) button once more to switch off.
3. The SumLight™ icon (on or off
) is displayed in the status bar.
Attention! When the SumLight™ function is activated, the noise level in the image increases,
the frame rate decreases and the image slows down. Any sharp movement of the device may
cause the image to become “blurred”. Such effects are not defects. Luminous white dots
(pixels) may be visible on the device’s display. The number of dots may increase when the
SumLight™ function is enabled. This is due to the peculiarities of this function and is also not
a defect.
To see the button operation scheme click
.
Summary of Contents for 78196
Page 1: ...Forward FN455 Manual ...
Page 8: ......
