![Forward 78196 Manual Download Page 39](http://html.mh-extra.com/html/forward/78196/78196_manual_2322587039.webp)
Video Recording and
Photography
The device is equipped with a function for video recording (and photographing) an observed
image that is saved onto the built-in memory card.
It is recommended to set the date and time (see the
section) before using
the photo and video functions.
The built-in recorder operates in two modes:
Photo (photography; in the top right corner of the display you can see an icon
). If the
estimated number of photos that can be saved to the Flash card is more than 100, the
message “>100” is shown.
Video (video recording; an icon
is displayed in the upper left of the display, the total
remaining recording time given the current resolution in HH:MM:SS format (hours :
minutes : seconds).
To toggle between Video and Photo modes press and hold down the RIGHT (6) button.
Switching between the modes toggles Video–> Photo–> Video...
Photo mode. Photographing an image
1. Switch to Photomode with a long press of theRIGHT (6) button.
2. To capture a photo, press the RIGHT (6) button briefly. The image freezes for 0.5 sec.
3. The photo is saved to the internal memory.
Video Mode Recording video clips
1. Switch to Video mode with a long press of the RIGHT (6) button.
2. The icon
and the remaining recording time in HH:MM (Hours:Minutes) format are
displayed in the upper left corner, for example, 5:12*. In the status bar, the video
recording status is displayed continuously.
3. Start video recording with a short press of the RIGHT (6) button.
4. When the video recording starts, the icon
will disappear and the REC icon and timer
in MM:SS (Minutes:Seconds) format will appear.
5. Press the RIGHT (6) button briefly to pause or resume video recording.
6. Stop the video recording by pressing and holding down the RIGHT (6) button.
7. Video files are stored in the internal memory card:
After turning off the video recorder;
When you turn off the device if the recorder had been turned on;
If the memory card is full, or if during a video recording the memory becomes full (a
“Memory full” message appears on the display).
* an icon will be displayed for 2 seconds and then disappear. When the RIGHT (6)or M (7)
Summary of Contents for 78196
Page 1: ...Forward FN455 Manual ...
Page 8: ......