ForU 3S Operating Manual Download

Page: 70 / 80

Issued: 08.01.2008

Transporting damaged batteries:

Always wear protective goggles and acid-proof gloves.

Always transport and store batteries in an acid-proof container.

Handling damaged batteries:

When handling damaged batteries or objects which

have been soiled with acid, you must always wear:
- protective goggles
- acid-proof gloves
- respiratory protection

Always wash soiled objects and tools with plenty of water.

Please give used or damaged batteries back to your dealer.

He will ensure that they are properly disposed of.

BATTERIES ARE HAZARDOUS WASTE!!

Used and defective batteries must be properly disposed
of and only handed over to the correct disposal points.

16.9.1 Disposal of used or damaged batteries

Caution acid!

• Observe safety information in chapter 1.6!

Risk of accidents!

• Refitting the battery may only be carried out by your dealer.

16.9 Batteries

Only replace the batteries with the following battery types:

12 V / 12 Ah, lead acid deep cycle batteries.

You may

not

use wet cell batteries with detachable cover caps.

Repairs - batteries

FOR U 3S / 4S

Summary of Contents for 3S

















































































Search results

Summary of Contents for 3S

Reviews:

Related manuals for 3S

Brands by name

Popular brands

ForU 3S, Operating Manual

Search results

Summary of Contents for 3S

Reviews:

Related manuals for 3S

Brands by name

Popular brands