5
OPERATION INSTRUCTION
FOR THE FIRST USE
As there is manufacturing residue or oil remained in the bread slot, it may emit odor when first use. It is normal
and will not occur after several times use. For the first use, it is suggested to operate by below steps without
bread. Let the toaster cool down afterwards, and begin toasting the first slice.
OPERATION
1.
Put bread slice into the bread slot, two slices can be inserted at most every time. Only the regular slice can
be placed into the bread slot. The irregular bread can only be toasted on the toast rack and by only one piece
every time. When toasting on the toast rack, press down the rack control handle to make the toast rack uplift,
then put the bread on the toast rack. Lift the rack control handle to reset the toast rack after use.
Note:
-
Make sure the crumb tray is completely positioned in place before use.
2.
Plug in the socket, the blue indicator at the bottom will be lighted up. The LED will display as
“
H
” and the “H” will flash until the carriage handle is pressed.
3.
Press the LIGHTER or the DAKER button to set your desired color. The lowest is the lightest and the
highest is darkest. The bread can be toasted to golden color by setting the position to the middle.
Note
:
-
Toasting color for toasting one slice is darker than double slices at the same level.
-
If toasted continuously, toasting color for the latter bread will be darker than the anterior bread at the
same level.
4.
Press the carriage handle down vertically until it is positioned in place, and toast will begin at once. Once
the bread is toasted to the preset color, the carriage handle will be automatically sprung up.
Note:
-
The carriage handle can be hold at the bottom of the slot when the power supply is on.
5.
During the toasting process, you may observe the toasting color. If it is satisfying, you can press the
CANCEL button to cancel the operation at any time.
6.
To toast the bread taken out from refrigerator. Set color to your desired color by pressing LIGHTER or
DARKER button. Press carriage handle down vertically until it is positioned in place. Press DEFROST
button, and its indicator will be illuminated. The bread will be toasted to your desired color in this mode.
7.
To reheat the cold toasted bread, press carriage handle down vertically until it is positioned in place. Press
the REHEAT button, and its indicator will be illuminated. Toasting time is fixed in this mode. As long as
the time is running over, the carriage handle will be automatically sprung up and the reheating process will
be ended.
