background image

Please follow below instructions  to prevent injury and property damage. 

2

Meanings of symbols in this user manual.

!

!

WARNING

Always do this.

Never do this.

Do not change the power
cord length or share the
outlet with other appliances. 

Ensure earthed effectively.

Disconnect the main power
if strange sounds, smell or
smoke comes from the unit.

Close the door while the 
air conditioner is running.

Ventilate room before operating air
conditioner if there is a gas leakage from
another appliance.

  It may cause electric shock or 
  fire due to heat generation.

  Incorrect earthing may cause 
  electric shock.

  It may cause fire and electric
  shock.

  It may affect the cooling 
  effectiveness.

  It may cause explosion, fire and burns.

  It may cause electric shock.

  It may cause failure of machine
  or electric shock.

  It may cause fire and electric 
  shock.

  It may cause electric shock or fire.
  If the power cord is damaged, it 
  must be replaced by the manufac-
  turer or an authorised service 
  centre or a qualified person in order
  to avoid a hazard.

  This could damage your health.

  Incorrect installation may cause 
  fire and electric shock.

  It may cause electric shock.

   It may cause an explosion or fire.

  It may cause failure and electric shock.

Do not operate with wet
hands.

Do not allow water to run
into electric parts.

Do not put the power cord
close to any heating 
sources.

Do not damage or use an 
unspecified power cord.

Do not direct airflow at 
room occupants .

Always install circuit
breaker and a dedicated
power circuit.

Do not open the unit
during operation.

Do not put the power cord near
flammable gas or combustibles, such
as gasoline, benzene, thinner, etc.

Do not disassemble or modify the unit.

!

!

!

!

!

!

!

SAFETY INSTRUCTION

Summary of Contents for FWAC08M16

















Reviews: