9
ELECTRICAL CONNECTION
電氣接駁
Caution: For safety, all electrical installation must be carried out by qualified technicians.
Always inspect the power cord and must be replaced by qualified technicians in case
of damage.
注意
:
爲確保安全，請安排合格技術員進行接駁。經常檢查電源線，如電源線損壞，需由
授權人士更換。
Caution: Do not switch on Electrical Supply to the Water Heater until it is completely filled.
注意
:
在熱水器未入滿水之前
,
切勿啓動電源。
1.
In the case of a 3kW rated unit, a 15Amp. Double Pole Linked switch with neon light must be
provided and installed at the entrance to the shower area to enable termination of electrical
supply to the water heater when necessary. Electrical supply to the water heater must be
connected to an individual fuse or circuit breaker of 15 Amp. In the main fuse board. The water
heater should be permanently connected to the fixed wiring of the installation.
如果熱水器的發熱線功能是
3
千瓦（
kW
），便可以用一個安裝在浴室門外的
15
安培的雙極
電源帶燈開關掣控制來電，電源要直接由主電箱供應，接上
15
安培或以上的保險絲或跳掣。
本電熱水器必須使用固定佈線電纜
(
俗稱硬線
)
連接。
2.
Make sure the water heater is filled with water before turn on the power.
使用前，請確保熱水器已注滿水。
