Finish washing
Programme selection
1 Install the washing
machine
3 measure the
detergent
7 Plug the power
cord
6 Turn on the water tap
8 Select the desired
programme
5 Hang the drain pipe
4 Close the of
washing machine
door
9 Press the
[start/pause] button
11
When the wash stops, the buzzer will buzz continuously for 6 times and
then the power will be automatically cut off.
Turn off the water tap.
Although the power can be cut off automatically, unplug the washer for safety.
1
Press the POWER button.
3
Press the start/pause button.
2
Select the proper water level or other attached functions.
2 Load the laundry
Instruction to the NORMAL program
Instruction to single wash procedure
Instruction to customized program
Steps in detail
1.Press the power switch.
2.Choose the suitable water level according to the washing amount.
3.Press START/PAUSE button.
12
!
!
[Normal] wash program is the easiest, most convenient and most common washing
program. When the user press the power switch and then press [Start/Pause] button,
the normal washing program will start to work.
When the washer starts to work, the digital display shows the remaining time. The indicator
indicating the remaining time will be flashing.
!
!
!
User can freely select any single procedure, or any combination of procedures among
WASH, RINSE and SPIN according to their needs. It is only required to turn
off any one or two of these three indicators that is not needed by the user. And keep the
indicator showing the process selected.
Single wash -- after switching on the power, turn off RINSE and SPIN two indicators
by pressing these two buttons. The operation for single rinse and single spin is similar.
Single wash-spin – after turning on the power, turn off RINSE indicator by pressing
that button.
!
User can freely select any combination among WASH, RINSE and SPIN modes
according to the dirty situation of clothes.
Detail operating details are as follows:
Continuously press the WASH button to select washing durations.
(1~20 minutes, or no wash process)
Continuously press the RINSE button to select rinse times.
(1~3 times, or no rinse process)
Continuously press the SPIN button to select the spin
.
(3~9 minutes or no spin process)
durations
Quick start
The main wash functions
!
!
!
!
Close the door lid when washer is running, otherwise, it will stop functioning automatically
during the spinning process and send out abnormal warming.
The washer will not work when the filled water does not reach the set water level.
The selection of rinse water level: the level is equal to wash water level.
Press [Rinse] button, the indicator for rinse level flashes.
User can select the rinse water level according to needs. Rinse level should exceed
wash level all the time. It shows the wash level if this button is not pressed.Rinse level
is only shown when rinsing.
After pressing [ Power Switch ], if the [Start / Pause ] button is not pressed,
the power will be automatically cut off after 10 minutes.
NOTICE
！
Summary of Contents for FJW70A11P
Page 1: ...FJW70A11P USER S Automatic ...
Page 9: ......
