9
Maintenance Instruction
.
Before cleaning, please switch off the appliance first and then disconnect the power plug from the
power outlet. Wait till the heating plate of the induction cooker is not hot and start cleaning.
.
After using the induction cooker for a long time, the opening of air inlet/air outlet will pile up with
dust or other dirt. Please wipe it with a soft dry cloth. Dust in the air inlet and outlet can be cleaned by
using a soft brush or a mini vacuum cleaner.
Note: Please do not rinse it with water.
.
For oil spots on the cooker plate, wipe the cooker plate by using a soft moist cloth with a little tooth
paste or mild detergent. Then use a soft moist cloth to wipe it until no stain remains.
.
When not using it for a long time, please disconnect the power plug from the power outlet
and protect the induction cooker from any dust or bug.
Troubleshooting
Problem
Check points
After plugging in the power cord and
pressing the “Power” key, the
indicator and display do not light up
.
The power plug is properly connected
.
The power key or power cord is damaged
.
For other causes, please contact the authorized service center
The “Power” indicator lights up and
the display works normally, but
heating does not start
.
The pot material is proper
.
The appliance is in a “Preset” status
.
For other causes, please contact the authorized service center
Heating suddenly stops during the
process
.
The temperature of the oil is too high
.
The temperature of the surroundings is very high
.
The air inlet or outlet is blocked
.
The default heating time is over
.
The self-safety protection starts, wait for several minutes and
re-connect power for use
.
For other causes, please contact authorized service center
The protection codes appear
Solutions
Protection for overheating of the
induction cooker
.
The temperature inside the induction cooker is too high,
when the temperature gets lower, press the “Power” key and
the heating will start normally
.
For other causes, please contact authorized service center
Protection for overheating of the
heating plate
.
The temperature of the heating plate is too high, when the
temperature gets lower, press the “Power” key and the
heating will start normally
.
For other causes, please contact the authorized service center
Protection for the inner sensor of
the induction cooker
.
When the induction cooker is being used under low
temperature environment or the need of food / water
temperature is too low, when heated for about 10 mins after
set temperature is not reached, the auto protection function
will start and automatic shutdown. With switching on the
appliance again and heating, the appliance will resume
normal operation.
.
For other causes, please contact the authorized service center
