INSTALLATION INSTRUCTION
Installing and removing the accessories
•
To remove the shelf: Grip the shelf, then lift it straight upward. To reinstall,
reverse the procedure.
•
To dismantle the flexible door rail: Pull out the tray first then draw the pedestal of
the door rail outward. Do no dismantle the tray and the pedestal at the same time.
When being placed on the ground of soil
•
If the refrigerator is placed on the ground of soil, please put a 10 cm thick wooden plate under it to prevent
rusting or the quality of electric components being affected.
•
The appliance should place on a flat ground.
Please use the specific socket
•
The refrigerator must be plugged into a specific socket for 220-240V and no less than 10A.
Please put the refrigerator in places with good ventilation
•
There should be enough space around the refrigerator for better ventilation and the electricity saving.
•
At least a 10 cm clearance should be kept between the upper, the backside, the left and the right side of the
refrigerator with walls or anything.
•
The contact may produce some electric sparks when the refrigerator is started; thus hazard is likely to occur
if there is gas around the refrigerator. Please shut down the gas and open all windows and doors in case of
gas leakage to ensure safety.
Please put the refrigerator in a place of low humidity
•
Do not put the refrigerator in a place of high humidity otherwise the refrigerator will be likely to
accumulate moisture and get rusty; the electric components will be easy to fail as well.
Keep the refrigerator away from direct sunlight and hot air
•
Do not expose the refrigerator to direct sunlight and hot air otherwise the cooling temperature will not be
sufficient and more power will be consumed.
3
