Fortress Technologies An E1T Timepiece, Manual

Page: 58 / 129

system VARiable report and interrogation
Nuggle programs can access system information using so-called system variables. These values
are variable in that the system will change them but the user cannot (at least within a Nuggle
program). They are therefore considered read-only.
amplifier VOLume control
Get and set the beep and chimes volume control settings. Report on the audio amplifiers.
WiFi tests and interrogation
These command require the WiFi module to be installed (obviously). They should be read and
used in conjunction with the ESP32-BIT documentation.
VAR? System VARiable help message
VARG name
Get the current value of a system variable, in both decimal and hexadecimal
example: varg latitude
returns: latitude = 57662 0xe13e
VARR Report system variable usage
VOL? amplifier VOLume control help message
VOLG get the beep and chimes volume settings
VOLR report
VOLS c, v
Set the volume for beep or chimes, where
n = 0 - beep
n = 1 - chimes
v - volume setting 0 .. 31
WIF? WiFi help message
WIFG Get the date and time using SNTP
WiFi command Send an AT command to the WiFi module.
WIFR Report on current WiFi settings.
WIFU Reset the WiFi module.
Page 58 Version 1.0 Copyright Grahame Marsh/Nick Stock 2019