Fortress Technologies An E1T Timepiece Manual Download Page 26

Page: 26 / 129

200 - Complex Faces

These faces are where all the previous themes and displays are brought together. So these faces

combine use of the E1T tubes, complex bling patterns and colours, and chimes together into

single faces. Perhaps not for the faint-hearted.

Face number

200

Nuggle file

nick01.nug

Description

Show the time using spinner
(as with 105 time10.nug) with
bling and chimes

Colons

None - used as bling

Bling

A fast rotation of blue bling
from left to right across the
top bling modules and then
right to left along the
downward modules.

Chimes

tintan00.wav, tintan15.wav,
tintan30.wav, tintan45.wav,
tintant.wav

Face number

201

Nuggle file

nick02.nug

Description

As with nick01.nug

Colons

None - used as bling

Bling

As with nick01.nug except the
colour is a rotating hue

Chimes

palm00.wav, palm15.wav,
palm30.wav, palm45.wav,
palmt.wav

Page 26

Version 1.0

Summary of Contents for An E1T Timepiece































































































































Search results

Summary of Contents for An E1T Timepiece

Reviews:

Related manuals for An E1T Timepiece

Brands by name

Popular brands

Fortress Technologies An E1T Timepiece, Manual

Search results

Summary of Contents for An E1T Timepiece

Reviews:

Related manuals for An E1T Timepiece

Brands by name

Popular brands