OTP and Proud Post: Installing Bracket Caps and Post Base Covers
• The bracket covers snap down into place.
• Use a rubber mallet, to snap the bracket covers in place.
• Remove all metal shavings from around the post base plate.
• Use a phillips head screw driver to assemble the post base cover.
OTP and Proud Post: I-Support Installation
• The I-Support should be located near the center of the panel directly under a baluster.
• The I-Support can rotate to any angle 0° to 40°. The height of the I-Support can change from 3.3” up to 5.7”.
• Install the I-Support by snapping the rail insert up into the bottom rail.
• Position the I-Support directly under a baluster.
• Unscrew the base until it reaches the stair surface.
• Attach the I-Support using the 3 provided T-25 wood screws.
12/15
