Water Tank
Adding Water:
1.
Remove the tank cover mounted on the mainframe (1).
2.
Fill water as shown (Figure A). Insert the Manual water pump (8) into the water and
the other end into the tank of the main frame (1). Squeeze the head of Manual
water pump (8), so water can be added to the water tank according to the water
level marked on water tank.
Note: Do not exceed the max water level; exceeding will damage the machine and
void the warranty.
3.
Put in a Water purification sheet and replace the cover back.
Removing Water:
1.
Pump water as shown (Figure A). Place a bucket next to the machine and use the
Manual water pump (8) to pump water from the tank into the bucket.
2.
Place the cover back to the water tank and dry any water around the machine.
Attention:
•
Add clear water into water tank, then put into a Water purification sheet.
Note: Do not use a damaged water purification sheets or bleach, it will damage
the machine and void the warranty.
•
Add water purification sheets every 6 months or as required. If the water is very
muddy, please replace the water in the water tank.
•
The water replaced in the water tank is not suitable for recycling use, please treat
as sewage.
•
If the machine is not used for an extended period, please empty the water in the
water tank and fold the machine.
Water tank
cover
Figure A
Summary of Contents for FSWMHMR600A
Page 1: ...WATER MAGNETIC HYBRID FULL MOTION ROWING MACHINE MR 600 FSWMHMR600A...
Page 2: ......
Page 5: ...OVERVIEW...
Page 19: ...NOTES...
