Assembly
Step 1
1. Lock the front bottom tube
(33) and the rear bottom
tube (28) onto the main
frame (31) with the bolts
(29) and arc washers (30).
Step 2
1. Insert the 8-level tension control wire (42) to the front stabilizer tube (41),
then pull out from the tube to connect the middle wires (34) & (35). Then
connect the wire of the controller with the bolt (39) and arc washer (40),
fixing the tension control (43) onto the front stabilizer tube (41).
2. Use the hexagon screw (15), washers (24) and nuts (25) to connect the
front stabilizer tube (41) to the main frame (31). Then use the washer (55)
and knob (58) to fix the the front stabilizer tube (41) and main frame (31),
then lock the hexagon screw (15) and cover with the screw end cap (26).
3. Use two of the bolts (56) to attach the bottle shelf (54) onto the front
stabilizer tube (41), then put the bottle (57) on it.
5
Summary of Contents for FSTNRELTPLA
Page 1: ......