Fortis FS16TRMPBBA, User Manual, Page: 14 / 15

Step Three
: Position the assembled backboard on the inside of the safety net at the pole
furthest away from the entrance. With the assistance of a second person, hold the bottom of the
backboard at the top of the safety net pole as shown in Fig 9. The fixing bracket should be
around 5cm from the top of the safety net. Locate the four (4) screw holes and using a pair of
scissors, carefully snip one strand at each screw location to allow for easy fitting.
Step Four : Fix the screws in the order shown below in Fig 10. The padding will compress as you
tighten the screws. Adequately fasten until the backboard is firmly positioned.
Step Five : Double check all screws and fittings have been tightened. Refer to Fig 11 and 12.
Step Six : Finally, attach the velcro netting as shown in Fig 13 and 14.
13