ONCE YOU HAVE THE VALUE
SET PRESS HERE TO SAVE.
PRESS HERE TO GO BACK TO
THE TIMER LIST AFTER SAVING CHANGE
OR A TOTAL OF 3 TIMES TO GET BACK TO
THE TRANSACTION SCREEN
T3 X S +
I1 06.500
I2 +0
□
T:00.000
T1 X S +
T3 X S +
T4 X S +
T5 X S +
TIMER LIST
C1 N +
S 00001
□
C:00000
PARAMETER ADJUSTMENT PROCEDURE
TIMER SCREEN
T3 X S +
I1 06.500
I2 +0
□
T:00.000
TIMER SCREEN
TIMERS AND PARAMETERS
T1 -
DO NOT CHANGE
T3 - OUTBOUND RUN TIME
T4 -
DO NOT CHANGE
T5 - INBOUND RUN TIME
T7 -
DO NOT CHANGE
T8 -
DO NOT CHANGE
T9 -
DO NOT CHANGE
T11 -
DO NOT CHANGE
T12 -
DO NOT CHANGE
T15 - ANTI-CONDENSATION START DELAY*
T16 - ANTI-CONDENSATION SETTINGS - I1 = BLOWER ON TIME IN SECONDS
I2 = OFF TIME IN MINUTES BETWEEN BLOWER PULSES. FACTORY SETTING
IS I1 = 4 (SECONDS) I2 = 90 (MINUTES)
THIS FEATURE IS ONLY ACTIVE
WHEN SYSTEM SWITCH IS OFF*
PARAMETERS
C1 = ANTI-CONDENSATION ON OR OFF (00001 = OFF 00000 = ON)*
C2 = AUTOMATIC TEST CYCLE ON OR OFF (00001 = OFF 00000 = ON)
THIS FEATURE
IS ONLY ACTIVE WHEN SYSTEM SWITCH IS OFF*
C5 -
DO NOT CHANGE
C12 -
DO NOT CHANGE
C15 -
DO NOT CHANGE
WHEN USING THE TEST CYCLE FUNCTION REMEMBER TO SET C2 TO 00000 AND TURN THE
SYSTEM SWITCH OFF. WHEN CYCLE TEST IS COMPLETE CHANGE C2 BACK TO 00001 AND
CHANGE THE SYSTEM SWITCH TO ON FOR NORMAL OPERATION (NOT AVAILABLE ON 3100
MODEL SYSTEM)
* INDICATES FEATURE THAT IS NOT AVAILABLE ON 3100 MODEL
PARAMETER SCREEN
THE PARAMETER SCREEN WILL ADJUST JUST LIKE A TIMER
WITH THE EXCEPTION THAT YOU ARE CHANGING THE VALUE
OF "S" INSTEAD OF I1.
15
