VENT TUBE
APPLY A SMALL AMOUNT
OF SILICONE AROUND THE
INSIDE OF THE EXPANDED
END BEFORE CONNECTING
TO TERMINAL VENT PORT
IF TERMINAL IS BEING USED
WITH A 3100 RT CUSTOMER
UNIT THIS PORT IS A PRESSURE
PORT AND MUST HAVE A
GOOD SEAL.
IF LONGER CARRIER AND VENT TUBES ARE NEEDED
CONTACT FORTIS SECURITY PRODUCTS FOR AVAILABILITY
INSTALL TUBES AS SHOWN
IF TUBES NEED TO BE TRIMMED
CUT THEM BEFORE INSTALLING
ON TELLER TERMINAL
MOUNTING HARDWARE
AND GASKET PACKAGED
SEPARATELY
INSTALL WIRE MOLD CENTERED
BEHIND CARRIER TUBE. LOCATE SO
THAT IT LINES UP OVER HOLE IN
REAR HOUSING. THIS WILL SERVE AS
A WIRE CHASE FOR YOUR CONTROL
CABLE
WIRE MOLD
PEEL AND STICK MOLDING
ON BEHIND CARRIER TUBE
TELLER INSTALLATION INSTRUCTIONS
10