
Maximum EIRP
33
B
Additional Notes
Maximum EIRP
The transmit EIRP is the sum of the conductive transmit power, IEEE Std 802.11n multiple
stream effect, and the antenna gain. By default, Meru OAP832e EIRP is set lower than the
regulatory limit with the default antenna.
Manufacturing Information
The OAP832e models are built in Taiwan.
Distributed Antenna Systems (DAS)
Meru Networks does not certify or endorse any specific Distributed Antenna System (DAS)
vendors. Meru Networks will provide support to Meru Wi-Fi customers that use distributed
antennas within the terms and conditions of the MeruAssure Terms of Service and in accor-
dance with the customer's support agreement. Meru Customer Support will support Meru soft-
ware and hardware, and will work jointly with DAS vendors to identify and troubleshoot issues,
but any support related to RF issues, including RF coverage, shall be the responsibility of the
DAS vendor.
Meru Networks recommends that customers use only a DAS that has been tested to work with
Meru hardware and software. Meru does not provide any site surveys, design or implementa-
tion of Wi-Fi over DAS. Meru recommends that customers obtain such services from a trained
and qualified systems integrator or from their DAS vendor.
Summary of Contents for OAP832E
