Appliance Setup
8.
If you want to enable FIPS, then choose
2 install_with_fips
. Otherwise, choose
1 install_without_fips
. You have
the option of enabling FIPS (option
3
) or disabling FIPS (option
4
) later.
Note
: After Installation, a 5th option to change your network configuration (
5 change_network_config
) is
available. This allows you to change your network configuration and/or host name.
9.
Determine whether your network supports IPv4-only, IPv6-only, or both IPv4 and IPv6 (Dual Stack). Choose
1
for
IPv4-only, choose
2
for IPv6-only, or choose
3
for both IPv4 and IPv6.
10.
If you choose
1
(IPv4) or choose
3
(Both IPv4 and IPv6), and press
Next
, then you will move to step 11. If you
choose
2
(IPv6), and press
Next
, then skip to step 12.
11.
When prompted, enter the information for these network components to configure the Static IP
address:
IP Address
,
Netmask
,
Gateway
,
DNS Server(s)
. Configure the network by entering the following fields.
Press
Next
.
Note
: Configuring a DNS Server to resolve external addresses as updates to remote repositories will be required in
FortiSIEM 6.3.1 500F Collector Configuration Guide
7
Fortinet Technologies Inc.
