Connecting to FortiVoice
You can configure your FortiVoice appliance using either its web pages (the web UI)
or the command line interface (CLI). After connecting, follow the setup instructions
in the FortiVoice Phone System Administration Guide.
To connect to the FortiVoice web UI
Browser requirements:
Internet Explorer 7 or higher, Firefox 3.5 or higher, Safari 4
or higher, and Adobe Flash Player 9 or higher plug-in required to display statistics
charts.
1.
Connect the FortiVoice appliance’s port1 to your computer using the provided
Ethernet cable.
2.
On your computer, configure it to match the appliance’s default port1 subnet.
For example, on Windows 7, click the
Start
(Windows logo) menu to open it, then
click
Control Panel
. Click
Network and Sharing Center
,
Local Area Connection
,
then the
Properties
button. Select
Internet Protocol Version 4 (TCP/IPv4)
then
click its
Properties
button. Select
Use the following IP address
, then change your
computer’s settings to:
• IP address:
192.168.1.2
• Subnet mask:
255.255.255.0
3.
To access the FortiVoice web UI, start a browser and browse to
https://192.168.1.99/admin
(remember to include the “s” in https:// and “/admin”
at the end of the URL).
4.
Type
admin
in the
Name
field, leave the
Password
field blank, and click
Login
.
To connect to the FortiVoice CLI
1.
Connect the FortiVoice console port to your computer using the console cable.
2.
On the management computer, start a terminal emulation program (such as
PuTTY)
. Use these settings:
• Serial line:
COM1
• Baud Rate:
9600
• Data bits:
8
• Parity: None
• Stop bits:
1
• Flow Control:
None
3.
Press
Enter
on your keyboard to connect to the CLI.
Page 2
Summary of Contents for FortiVoice Enterprise 3000E
Page 1: ...FortiVoice 3000E QuickStart Guide...
Page 23: ......
