Fortinet FortiVoice Enterprise 3000E, Quick Start Manual

Page: 14 / 23

This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy, and if it is not installed and used in accordance with
the instruction manual, it may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference, in which case the user will be required to correct the interference at his
own expense.
WARNING: Any changes or modifications to this product not expressly approved by
the party responsible for compliance could void the user’s authority to operate the
equipment
This equipment complies with ACTA TIA/EIA/IS-968-B-1 and Part 68 of the FCC
rules and the requirements adopted by the ACTA. On the base of this equipment
is a label that contains, among other information, a product identifier in the format
US: AAAEQ##TXXXX. If requested, this number must be provided to the telephone
company.
This equipment uses the following USOC jacks: RJ45
A plug and jack used to connect this equipment to the premises wiring and
telephone network must comply with the applicable FCC Part 68 rules and
requirements adopted by the ACTA. A compliant telephone cord and modular
plug is provided with this product. It is designed to be connected to a compatible
modular jack that is also compliant. See installation instructions for details.
The REN is used to determine the number of devices that may be connected to a
telephone line. Excessive RENs on a telephone line may result in the devices not
ringing in response to an incoming call. In most but not all areas, the sum of RENs
should not exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total REN, contact the local telephone
company. The REN for this product is separately shown on the label and also
part of the product identifier that has the format US: AAAEQ##TXXXX. The digits
represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
If this equipment causes harm to the telephone network, the telephone company
will notify you in advance that temporary discontinuance of service may be required
until the problem is resolved. But if advance notice is not practical, you will be
notified by the telephone company as soon as possible. You will be advised
Page 11