Appliance Setup
This document describes how to setup the FSM-500F appliance.
l
l
l
l
Fresh Installation
l
Step 1: Rack mount the FSM-500F Appliance
l
Step 2: Power On the FSM-500F Appliance
l
Step 3: Verify System Information
l
Step 4: Configure FortiSIEM via GUI
l
l
Step 1: Rack mount the FSM-500F Appliance
1.
Follow
FortiSIEM 500F QuickStart Guide
to mount FSM-500F into rack.
2.
Connect FSM-500F to the network by connecting an Ethernet cable to Port1.
Before proceeding to the next step, connecting Ethernet cable to Port1 is required for Network
configuration.
Step 2: Power On the FSM-500F Appliance
1.
Make sure the FSM-500F device is connected to a Power outlet and an Ethernet cable is connected to Port1.
2.
Power On the FSM-500F device.
Step 3: Verify System Information
1.
Connect to the FSM-500F appliance using VGA port or Console port.
2.
Login as user
root
with password
ProspectHills
.
3.
You will be asked to change your password. Once you change the password, you will be logged out. Login again
with your new password.
FortiSIEM 6.1.2 500F Collector Configuration Guide
4
Fortinet Technologies Inc.
