Fortinet FortiSIEM 500F, Configuration Manual

Page: 3 / 26

TABLE OF CONTENTS
Appliance Setup 4
Fresh Installation 4
Step 1: Rack mount the FSM-500F Appliance 4
Step 2: Power On the FSM-500F Appliance 4
Step 3: Verify System Information 4
Step 4: Configure FortiSIEM via GUI 5
Step 5: Register Collectors 9
Step 6: Using FortiSIEM 12
Factory Reset 13
Step 1: Uninstall FortiSIEM application 13
Step 2: Reinstall FortiSIEM application 13
Upgrading FortiSIEM Collector 13
Appliance Re-image 13
Step 1: Create Bootable Linux Image 14
Step 2: Copy FortiSIEM Collector image to USB 14
Step 3: Prepare 500F by removing FSM 14
Step 4: Configure 500F BIOS to Boot into USB Drive 15
Step 5: Re-image 500F boot drive from USB Linux 15
Migrating from Pre-6.1.2 FortiSIEM 16
Pre-Migration Checklist 16
Migrate Collector Installation 16
Download the Bootloader 16
Prepare the Bootloader 17
Load the FortiSIEM 6.1.2 Image 18
Migrate to FortiSIEM 6.1.2 20
Restore the HTTP Password File From Backup 24
Re-Register to the Supervisor 24
Reboot the Appliance 25
FortiSIEM 6.1.2 500F Collector Configuration Guide 3
Fortinet Technologies Inc.