Factory Reset
Factory Reset
Follow the steps below to perform factory reset on FortiSIEM FSM-2000F.
Step 1: Uninstall FortiSIEM application
1. Connect FortiSIEM device using VGA or Console port.
2. Login as ‘
admin
’ user without password.
3. To check the available FortiSIEM commands, run
sudo get
.
4. To uninstall FortiSIEM, run
sudo execute fsm-clean
.
This script will uninstall FortiSIEM application.
Step 2: Reinstall FortiSIEM application
1. Power on the hardware.
2. Login as ‘
admin
’ without password.
3. To configure RAID, run
execute format disk
.
4. To check Hardware status and RAID information, run
diagnose hardware info
.
5. To install FortiSIEM, run
execute factoryreset
.
This script takes 5 minutes to complete FortiSIEM installation.
6. To configure network on FortiSIEM, stop FortiSIEM services by running
sudo execute preparebox
.
This script will stop running FortiSIEM services and power offs the hardware.
Follow the steps under
Appliance Setup
to configure FSM-2000F.
FortiSIEM - 2000F Hardware Configuration Guide
Fortinet Technologies Inc.
7
