Appliance Setup
5.
Command
Description
get system status
Displays system name, version and serial number.
diagnose hardware info
Displays system hardware information like CPUs, Memory
and RAID information.
diagnose interface detail port1
Displays interface status.
Step 4: Configure Network
1. On the hardware console, select
Set Timezone
and then press
Enter
.
2. Select your
Location,
and then press
Enter
.
3. Select your
Country,
and then press
Enter
.
4. Select your
Timezone,
and then press
Enter
.
5. Review your Timezone information, select
1
, and then press
Enter
.
6. When the
Configuration
screen reloads, select
Login
, and then press
Enter
.
7. Enter the default login credentials:
Login
root
Password
ProspectHills
8. Run the
vami_config_net
script to configure the network.
/opt/vmware/share/vami/vami_config_net
9. When prompted, enter the information for these network components to configure the Static IP address:
IP
Address
,
Netmask
,
Gateway
,
DNS Server
(s).
Note:
The authenticated proxy server is not supported in this version of FortiSIEM.
10. Press
Y
to accept the network configuration settings.
11. Enter the
Host name,
and then press
Enter
.
Once the configuration is complete, the system reboots automatically.
Step 5: Generate FortiSIEM FSM-2000F License Key file from FortiCare
1. Obtain the Hardware Serial Number from FSM-2000F appliance.
2. Follow 'FortiSIEM Licensing Guide'
here
to generate the license key file - remember to use ‘Hardware Serial
Number’ for Hardware ID.
Step 6: Register FortiSIEM License
1. Note the IP Address assigned to FortiSIEM VM in
Step 4
.
2. Access FortiSIEM VM from browser (
https://<FortiSIEM-IP>
).
3. Upload the license file obtained from
Step 5
and select the
License Type
based on your deployment (note this
choice can only be made once and is not reversible):
l
Enterprise for single organizations
l
Service Provider for multiple organizations
FortiSIEM - 2000F Hardware Configuration Guide
Fortinet Technologies Inc.
5
