Hardware Install Guide for FortiScan
9
2
Seat each end piece in the front holes of the vertical rack flanges (1).
3
Align each end piece to seat the pegs in the top and bottoms holes of the first U (2).
4
Engage the back end of the rail until it fully seats on the vertical rack flange and the
second “tooth” on the latch locks in place. Repeat these steps to position and seat the
front end piece on the vertical flange (3).
Figure 1:
Installing and removing the rails (square-hole racks)
To remove the rails, pull on the latch release button on the end piece midpoint and
unseat each rail.
1
3
2
