Fortinet Server Authentication Extension Version 1.5 Technical Note
14
01-30005-0373-20071001
Configuring FSAE on FortiGate units
Using FSAE on your network
Configuring FSAE on FortiGate units
To configure your FortiGate unit to operate with FSAE, you
•
specify the Windows AD servers that contains the FSAE collector agents
•
add Active Directory user groups to new or existing FortiGate user groups
•
create firewall policies for Windows AD Server groups
•
optionally, specify a guest protection profile to allow guest access
Specifying your collector agents
You need to configure the FortiGate unit to access at least one FSAE collector
agent. You can specify up to five Windows AD servers on which you have installed
a collector agent. The FortiGate unit accesses these servers in the order that they
appear in the list. If a server becomes unavailable, the unit accesses the next one
in the list.
To specify collector agents
1
Go to
User > Windows AD
and select Create New.
2
Enter the following information and select OK:
Name
Enter a name for the Windows AD server. This name appears in the list
of Windows AD servers when you create user groups.
FSAE Collector IP
Enter the following information for up to five collector agents.
IP Address
Enter the IP address of the Windows AD server where this collector
agent is installed.
Port
Enter the TCP port used for Windows AD. This must be the same as
the FortiGate listening port specified in the FSAE collector agent
configuration. See
“Configuring FSAE on Windows AD” on page 8
.
Password
Enter the password for the collector agent. This is required only if you
configured your FSAE collector agent to require authenticated access.
See
“Configuring FSAE on Windows AD” on page 8
.
Summary of Contents for Fortinet 1.5
Page 19: ...www fortinet com...
Page 20: ...www fortinet com...
