Getting started with FortiGate-7000
Fortinet Technologies Inc.
l
From the GUI access the Global GUI and go to
Network > Interfaces
. Edit any interface to change its IP address
and other settings.
l
From the CLI:
config system interface
edit <interface-name>
set ip <ip-address> <netmask>
end
Resetting to factory defaults
At any time during the configuration process, if you run into problems, you can reset the FortiGate-7060E to factory
defaults and start over. From the primary FIM CLI enter:
config global
execute factoryreset
Restarting the FortiGate-7060E
To restart all of the modules in a FortiGate-7060E, connect to the primary FIM CLI and enter the
execute reboot
command. When you enter this command from the primary FIM, all of the modules restart.
To restart individual FIMs or FPMs, log in to the CLI of the module to restart and run the
execute reboot
command.
FortiGate-7060E 6.4.2 System Guide
36
