manualshive.com logo in svg

Fortinet FortiGate 50R, Installation And Configuration Manual, Page: 56 / 240

Share
Download
Fortinet FortiGate 50R Installation And Configuration Manual Download Page 56

56

Fortinet Inc.

Changing the FortiGate firmware

System status

5

Enter the following command to copy the firmware image from the TFTP server to the 
FortiGate:

execute restore image <name_str> <tftp_ip>

Where 

<name_str>

 is the name of the firmware image file on the TFTP server and 

<tftp_ip>

 is the IP address of the TFTP server. For example, if the firmware image 

file name is 

FGT_300-v250-build045-FORTINET.out 

and the IP address of the 

TFTP server is 192.168.1.168, enter:

execute restore image FGT_300-v250-build045-FORTINET.out 

192.168.1.168

The FortiGate unit uploads the firmware image file, upgrades to the new firmware 
version, and restarts. This process takes a few minutes.

6

Reconnect to the CLI.

7

To confirm that the new firmware image has been loaded, enter:

get system status

8

Use the procedure 

“Manually updating antivirus and attack definitions” on page 75

 to 

update antivirus and attack definitions, or from the CLI, enter:

execute updatecenter updatenow

9

To confirm that the antivirus and attack definitions have been updated, enter the 
following command to display the antivirus engine, virus and attack definitions version, 
contract expiry, and last update attempt information.

get system objver

Revert to a previous firmware version

Use the following procedures to revert your FortiGate unit to a previous firmware 
version.

Reverting to a previous firmware version using the web-based 
manager

The following procedures return your FortiGate unit to its factory default configuration 
and delete NIDS user-defined signatures, web content lists, email filtering lists, and 
changes to replacement messages.

Before running this procedure you can:

• Backup the FortiGate unit configuration, use the procedure 

“Backing up system 

settings” on page 64

.

• Backup the NIDS user defined signatures, see the 

FortiGate NIDS Guide

• Backup web content and email filtering lists, see the 

FortiGate Content Protection 

Guide

.

If you are reverting to a previous FortiOS version (for example, reverting from FortiOS 
v2.50 to FortiOS v2.36) you may not be able to restore your previous configuration 
from the backup configuration file.

1

Copy the firmware image file to your management computer.

2

Login to the FortiGate web-based manager as the admin administrative user.

Summary of Contents for FortiGate 50R

















































































































































































































































Reviews:

No comments