13
Junction box
In situations that require a larger space for cable routing, but not the pendant arm, it is possible to directly mount the
CD51/55 camera to a FortiCam-FB50-Mount-JBX (SKU: FCM-FB5-JBX-4) Junction box.
1. Use the Mounting Guide for FortiCam FB50 for instructions on how to mount the junction box to a wall or ceiling.
https://docs.fortinet.com/product/fortirecorder/hardware
2. Attach the mounting plate to the junction box cover with two of the supplied machine bolts (M4 x 10mm) using
opposing FT2 positions.
3. Open camera housing using the three cover screws without removing the protective wrap from the lens.
4. Connect the cable with the camera optionally using the waterproof connector. The rubber plug in the central
opening seals the cable from the camera. Keep the connector inside the junction box.
5. Place the camera on the mounting plate so the sockets fit into the matching recesses on the camera bottom.
6. Fasten the camera with two of the supplied machine bolts (M4 x 10mm) to the sockets.
7.
Adjust the camera’s pan, tilt, and rotation angle.
8. Replace the dry pack found inside the camera with the fresh one from the protective pouch in the box. Ensure no
moisture gets trapped inside the camera.
9. Ensure the inside of the dome cover is free of dust and particles by gently wiping the inside with a clean lint free
cloth or blowing the dust away.
10. Install the dome cover and remove the protective wrap.
