FIM-7941F interface module
Fortinet Technologies Inc.
Connector
Type
Speed
Protocol
Description
M1 and M2
QSFP28
100Gbps
40Gbps
4 x 25Gbps (split)
4 x 10Gbps (split)
Ethernet
Two front panel 100GigE QSFP28 base channel
management interfaces. These interfaces are
used for HA heartbeat, and session
synchronization between FIM-7941Fs in different
chassis. These interfaces can also be used for
management communication (for example, for
remote logging). The speed of these interfaces
can be changed to 40Gbps. These interfaces can
be split into four interfaces. Each split interface
can operate at 25Gbps or 10Gbps.
M3 and M4
SFP28
25Gbps
10Gbps
Ethernet
Two front panel 25GigE SFP28 base channel
management interfaces. These interfaces are
used for HA heartbeat, and session
synchronization between FIM-7941Fs in different
chassis. These interfaces can also be used for
management communication (for example, for
remote logging). The speed of these interfaces
can be changed to 10Gbps.
MGMT1 and
MGMT2
RJ-45
10Mbps
100Mbps
1000Mbps
Ethernet
Two 10/100/1000BASE-T copper out of band
management ethernet interfaces.
USB
USB 3.0
Type A
USB 3.0
USB 2.0
Standard USB connector.
Console
RJ-45
9600 bps
8/N/1
RS-232
serial
Serial connection to the FIM-7941F CLI.
Physical description
Dimensions
2.48 x 17.11 x 18.56 in. (63 x 435 x 471.3 mm) (Height x Width x Length)
Weight
25.66 lb. (11.65 kg)
Operating Temperature
32 to 104°F (0 to 40°C)
Storage Temperature
-31 to 158°F (-35 to 70°C)
Relative Humidity
5 to 90% (Non-condensing)
Power consumption
Max: 630W; Average 598W
Max Current
53A
Heat Dissipation
2148KJ/h (2036BTU/h)
FIM-7941F 6.4.8 Interface Module Guide
8