Inserting a FIM-7904E module into a chassis
Hardware installation
3. Carefully slide the module into the slot until the handles engage with the sides of the
chassis slot, partially closing them.
Insert the module by applying moderate force to the front faceplate (not the handles) to slide the module into the
slot. The module should glide smoothly into the chassis slot. If you encounter any resistance while sliding the
module in, the module could be aligned incorrectly. Pull the module back out and try inserting it again.
4. Push both handles closed and close the latches.
Closing the handles draws the module into place in the chassis slot and into full contact with the chassis
backplane. The module front panel should be in contact with the chassis front panel and the latches should drop
down and lock into place. You should gently push the latches down to make sure they lock. The module will not
receive power until the latches are fully locked.
14
FIM-7904E Interface Module Guide
Fortinet Technologies Inc.
