Fortinet FAP-224E, Quick Start Manual, Page: 12 / 32

12
Weatherproof Connector
The unit requires 48V DC power, which is delivered by the PoE injector over a straight-
through Ethernet cable.
To install the weatherproof connector
1. Unscrew the coupling ring from the waterproof connector, remove the sealing gland,
and thread the RJ-45 plug through the connector components:
2. Insert the RJ-45 plug into the PoE port on the unit and install the weatherproof panel
connector onto the threaded coupling at the port.
3. Slide the sealing gland along the cable into the panel connector.
4. Thread the coupling ring into the panel connector and tighten it until the sealing gland
is compressed, making a watertight seal on the cable.
Cabling
B