•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This device complies with the Industry Canada Radio Standards Specifi cation RSS 210. Its use is
authorized only on a no-interference, no-protection basis; in other words, this device must not be
used if it is determined that it causes harmful interferences to services authorized by IC. In addition,
the user of this device must accept any radio interface that may be received, even if this interference
could affect the operation of the device.
Warning! Changes or modifi cations not expressly approved by the party responsible for compliance
could void the user’s authority to operate this device.
USING THE REMOTE CONTROL
The remote starter is equipped with two 1-way 4-button multi-channel remote control.
COMMAND
TIME
PRESSED
DESCRIPTION
LOCK
0,5 SEC.
Locks all doors, arm the anti-theft
system and activates the Alarm (if
installed). Press LOCK for 3 sec-
onds to activate the Panic Mode
UNLOCK
0,5 SEC.
Unlocks all doors, disarms the
anti-theft system and deactivates
the Alarm (if installed).
START
3 SEC.
Remote-start the vehicle. Press
START again to reset the runtime.
(See: remote-starter features,
page 7)
TRUNK
(FUNC-
TION)
3 SEC.
Opens the trunk, and deactivates
the Alarm (if installed). The Alarm
ignores the trunk zone until it is
closed.
Press and
release
FUNCTION
and then
press
START
STOP
0,5 SEC.
Remote-Stop.
Press and
release
FUNCTION
and then
press
LOCK
AUX.1
0,5 SEC.
AUXILIARY1 (See: Auxiliary use,
page 10):
Press and
release
FUNCTION
and then
press
UNLOCK
AUX.2
0,5 SEC.
AUXILIARY2 (See:Auxiliary use,
page 10)
Page 4 / 14