Strike plate
Faceplate
20mm
Installation:
Please make sure the correct
direction of the shims when mounted
For hollow metal doors:
For wood doors:
45mm
Drill hole for deadbolt
(If wood door)
Drill hole for magnet
(if wood door)
Door
◆
The lock is hot
?
The operating temperature of the lock is normally within 55
℃
.
◆
No operation after installation
?
1.Please check power supply. 2.Please check if the direction of
the template is being installed correctlly 3.Please check the
connection points(N.O or N.C)
◆
Lock will open when force is applied on the reader (eg. Hitting
hard or vibrating the reader).
?
1.Please check all the connections .
2.Reader's N.C points might strike immediately when force is
being applied on it this eventually causes the fail-safe type of lock
to open when sudden power cut occured. Please refer to page 1
for wiring to prevent such case happen.
Question & Answer
19.6.V1.E
Page 4
