Step 2> Remove the programmed indoor phone, and connect the next indoor phone.
Step 3> Repeat step1 and 2 for the other indoor phones.
In case any programmed indoor phone has to match with another call button, please just do as Step 1 but choose the correct call
button.
If any apartments need more indoor phones, please just program these indoor phones to match with the same call button.
11
2
"
+
Step 1> Match indoor phone with call buttons
Push both and buttons and do not release them, then push a specific call button for 2 seconds as
the following figures. If the program is successful, both door station and indoor phone will sound double
short beeps. Mark the call button number on a proper position of the indoor phone.
3.2.2 To program the out door station’s call buttons the relevant indoor phones
3.3 Isolation Module (FTDEIM)
The isolation modules have the functions of audio & video signal distribution, amplification and mal-
function isolation. Each module supports up to 4 indoor phones. Indoor phones are workable in 50
meters from their modules.
There are jumper couplers in the back of the modules (as the following figures). Please arrange them
according to different applications.
1F
2F
1M
100
1F
2F
1M
100
1F
2F
1M
100
1F 1M(default)
1F 100
2F 100
3.3.1 Jumper couplers
For FTDEV1-4 kit, jumper couplers of the only module is at the place “1F 100";
For FTDEV5-8 kit, jumper couplers of the 1st module is at the place “1F 1M”, the 2nd module is
For
jumper couplers of the 1st and 2nd modules is at the place “1F 1M”, the 3rd module is at the place
at the place “1F 100";
FTDEV9-12 kit,
“1F 100".
Application 1: Distance is in 30 meters between two modules.
Application 2: Distance
≥
30 meters between two modules, please make sure it doesn’t exceed 40 meters.
No.1:1F 1M
No.2:1F 1M
No.3:1F 100
INPUT
INPUT
INPUT
Pout
Pout
<30m
<30m
No.1:1F 1M
No.2:1F 1M
No.3:1F 100
INPUT
INPUT
INPUT
Sout
Sout
30m-40m
30m-40m
3.3.2 Wiring
①
②
①
②
③
