MTX-HSPA-PH8-P+G
www.mtxm2m.com
www.matrix.es
2014/11 v2.0
Page
7
/
68
MTX Terminals® by MATRIX ELECTRONICA S.L.U
1.
Introduction
1.1
Description
When your application needs to receive data up to 3.6 Mbps download or transmit up to 386Kbps,
the MTX-HSPA-PH8-P+G modem is the solution based on HSDPA technology.
The HSPA (High Speed Downlink Packet Access) is a transmission standard based on the UMTS
network which allows a download speed of up to 3.6 Mbit/s. The technology therefore enables
services like broadband internet, e-mail access, high-speed download of large data files and
streaming of videos or music.
The MTX-HSPA-PH8-P+G is a complete modem that encapsulates everything you need in one
compact plug-and-play unit. The integration is almost not needed because it has its own SIM card
reader and a USB port plus an RS232 port which minimize the need for further hardware
components.
The MTX-HSPA-PH8-P+G is controlled via AT commands and standard interfaces such as Serial RS232
and USB 2.0 full speed and RIL/NDIS driver.
When the UMTS-HSDPA network operation is not present, the MTX-HSPA-PH8-P+G can operate in
EDGE class 12 max. 236.8 kpbs (DL), max. 118 kbps (UL) or in GPRS class 12: max. 85.6 kbps (DL), max.
42.8 kbps (UL)
The MTX-HSPA-PH8-P+G can also work in simple CSD data transmission (GSM data rate 14.4 kpbs,
V.110, UMTS data rate 57.6 kpbs V.120) as well Short Messaging (SMS) and FAX specifications. It also
has an analog interface and is capable of making voice communication calls.
As a plus feature the MTX-HSPA-PH8-P+G adds a GPS receiver and NMEA protocol in the third
multiplex channel (MUX GSM 07.10 protocol is needed).
The MTX-HSPA-PH8-P+G is manufactured with SMD Technologies following the ISO 9001 & IS0 14001
Quality certifications and it is RoHs / WEEE compliant.
A full list of antennas, cables, supplies and accessories are available.
The MTX-HSPA-PH8-P+G modem is powered by an internal SIEMENS Wireless Module PH8
